COBRA EQUIPMENT SALES

Tandem Tag Trailer
Deck length 7.2m
Width 2.5m
Ramp length 2.1m
9.5R17.5 radial tyres - all at 90%
Wind down front leg, flying saucer hitch.
$28,500 plus GST = $31,350

UNKNOWN MT TANDEM TAG

One Mahinda EMax 25L 4x4 tractor with quick hitch, four-in-one multi-purpose bucket and digger post hole digger on three point linkage. Rear PTO and mid PTO for under mount mower. Four wheel drive 25hp diesel engine with forward and reverse shuttle, hydrostatic drive, 12V electrical system, full lighting, ROPS canopy, 65 hours from new.
Now with a four foot slasher and post hole digger.
$25,000 plus GST = $27,500

MAHINDRA EMAX 25

Anson AX-12.6 1 tonne mini excavator - with 
Japanese made Kubota D722 engine 9.9kW, Shimadazu gear pump, Nachi double-speed driving motor, Eton swing motor, side swing boom, retractable undercarriage, auxiliary piping for attachments. 
Length 3575mm / Width 1240mm / Height 2250 / 
With pull pin quick hitch, general purpose excavating bucket, 300mm trench bucket, 1000mm plain bucket, half quick hitch (pull pin), and ripper. 
$18,000 plus GST
All trades considered.

ANSON AX-12.6

Anson AX-18.5 1.76 tonne mini excavator - with 
Japanese made Kubota engine 10.3kW engine, Nachi hydraulic pump, Nachi double-speed walking motor, Eton swing/rotation motor, Italian hydro-control main/multi-way valve, hydraulic pilot operation control, track hydraulic tightening, swing boom, rubber tracks, Retractable chassis/track, side swing arm, adjustable driving speed, tail-less rotation, rotation with auto-braking function, oil cylinder with buffer, with auxiliary piping for attachments, the main configuration is 90% the same as Kubota.
$27,250 plus GST
All trades considered.

ANSON AX-18.5

Anson AX-20.6 1.92 tonne mini excavator - with
Japanese made Kubota D902 engine 11.8kW, Nachi hydraulic pump, Nachi double speed walking motor, Eton swing/rotation motor, Italian hydro-control main/multi-way valve, hydraulic pilot operation control, track hydraulic tightening, swing boom, rubber tracks, auxiliary piping for attachments, Retractable chassis/track, side swing arm, attachments, adjustable driving speed, tail-less rotation, rotation with auto-braking function, oil cylinder with buffer, the main configuration is 90% the same as Kubota.
$32,950 plus GST
All trades considered.

ANSON AX-20.6

Shantui SE25SR excavator - 2.68 tonne with Yanmar 3TNV80F 14.6kW (19.572hp) 2400rpm Tier 4 engine, attachment piping, general purpose excavating bucket, certified ROPS canopy.
$35,900 plus GST = $39,490

Cobra Equipment Sales is a Shantui Construction Machinery authorised dealer since 2018 and has been selling new and used earthmoving equipment since 2005.

SHANTUI SE25SR

JCMA 925LC excavator
25 tonne with Cummins engine (recent rebuild by Cummins), Kawasaki hydraulics, bi-directional piping, hydraulic quick-hitch, general purpose bucket, batter bucket, ripper.
$44,500 plus GST = $48,950
Also available tilting batter bucket, compaction wheel, auger drive unit, and grab at additional cost.

JCMA 925LC

Shantui HD17-C3 XLF 17.73 tonne (pre forestry protection fitted) fully hydrostatic bulldozer with Weichai WP110G 152kw (204hp) 1800rpm, Tier 3 engine, left lever controls variable speed and direction, right lever controls all blade functions, semi U or straight blade, three shank rippers or winch, 510 / 560 / 610 mm track shoes and track roller guards, engine side guards, ROPS/FOPS air-conditioned cabin with forestry protection, radio, and suspension seat.
$254,000 plus GST = $279,400

SHANTUI DH17-C3XLF

Anson AX-25.5 2.48 tonne mini excavator - with 2.48 tonne Japanese made engine 15kW, Nachi hydraulic pump and swing/rotation motor, Nachi double-speed walking motor, Italian hydro-control main/multi-way valve, hydraulic pilot operation control, track hydraulic tightening, swing boom, rubber tracks, secondary hydraulic pipeline for hydraulic attachments, Retractable chassis/track, side swing arm, adjustable driving speed, tailless rotation, rotation with auto-braking function, oil cylinder with buffer, auxiliary piping for attachments, the main configuration is 90% the same as Kubota.
$37,500 plus GST
All trades considered.

ANSON AX-25.5

Shantui SD22F - 26 tonne (approximately with forestry) bulldozer with Cummins (235hp) engine, powershift transmission, straight tilt blade, rear rippers, engine side guards, ROPS air-conditioned cabin with forestry protection, radio, UHF radio, and suspension seat. Fully serviced and with new chains, sprockets, and rollers. 
$160,000 plus GST = $176,000

SHANTUI SD22F

Anson AX-35.5 3.515 tonne mini excavator - with
Japanese made Kubota engine 20.5kW engine, Nachi hydraulic pump and swing/rotation motor, Italian hydro-control main/multi-way valve, hydraulic pilot operation control, track hydraulic tightening, swing boom, rubber tracks, secondary hydraulic pipeline for hydraulic attachments, Side swing arm, adjustable speed, hydraulic guide walking, air-conditioned cab, auxiliary piping for attachments, the main configuration is 90% the same as Kubota.
$48,000 plus GST
All trades considered.

ANSON AX-35.5

Shantui SE17SR excavator 
1.8 tonne with Kubota D902 11.8kW (15.82hp) 2300rpm Tier 4 engine, hydraulic quick hitch, attachment piping, two buckets, and certified ROPS canopy.
Price dependent on other attachments selected
$26,000 plus GST = $23,600

Cobra Equipment Sales is a Shantui Construction Machinery authorised dealer since 2018 and has been selling new and used earthmoving equipment since 2005.

SHANTUI SE17SR

COBRA EQUIPMENT SALES offer quality new and used listings for sale. Click here to search and view their latest stock list on tradeearthmovers.com.au

New & Used Earthmovers For Sale

COBRA EQUIPMENT SALES

Sale Price

UNKNOWN MT TANDEM TAG

MAHINDRA EMAX 25

ANSON AX-12.6

ANSON AX-18.5

ANSON AX-20.6

SHANTUI SE25SR

JCMA 925LC

SHANTUI DH17-C3XLF

ANSON AX-25.5

SHANTUI SD22F

ANSON AX-35.5

SHANTUI SE17SR

COBRA EQUIPMENT SALES

Dealer Address